Boardrecord
PCB reverse engineering
Recover a usable design record from an industrial board when the original files are gone.
Read PCB reverse engineeringProfessional PCB Reverse Engineering and Legacy Board Design Recovery
Obsolete PCBA redesign, schematic and BOM extraction for industrial equipment maintenance.
Services for boards you are authorized to maintain
Each service has its own page, deliverables, and limits.
Legacy PCB design recovery
Turn an aging industrial board back into design files your team can archive and maintain.
Read Legacy PCB design recovery
Schematic and BOM extraction
Extract a schematic and a bill of materials from the board that is actually in the machine.
Read Schematic and BOM extraction
Obsolete component PCB redesign
Redesign a board around parts you can still buy, without pretending the old silicon is still in production.
Read Obsolete component PCB redesign
Industrial PCBA digitization
Put an aging assembly into an indexed digital archive before the last sample is lost.
Read Industrial PCBA digitization
Gerber file reconstruction
Rebuild fabrication data from a legacy board so a new lot can be manufactured for maintenance.
Read Gerber file reconstructionWhy maintenance teams use Boardrecord
Measured capture
Copper, drill, and markings are recorded from the sample, with open items where the board cannot prove a feature.
Industrial work
Projects are scoped for equipment maintainers, automation teams, and repair shops, not for consumer gadgets.
Remote handover
Design packs are delivered as files your engineers can review, with a call to walk through assumptions.
Authorized samples
Work starts only after you confirm ownership or written authorization on the inquiry form.
Direct response
A complete inquiry, with photos when you have them, gets a scoped reply rather than a generic brochure.
Selected project records
Industrial Power Board Design Recovery After a Lost Archive
A maintenance shop needed a buildable record of a power board used in stationary equipment.
Read this project record
Industrial Control Board File Recovery for a Line Controller
A control board on a packaging line had no schematic in the plant document system.
Read this project record
Legacy Equipment Controller Recovery for a Single Spare
One spare controller remained for a machine that is still booked for years of production.
Read this project recordProblems this work is meant to solve
Design files were lost
The machine is still in service and the CAD archive never arrived with it.
Devices are withdrawn
The fitted part is no longer made, so a repair lot needs a redesign path.
No spare assembly
The last board is in the machine, and the crib has nothing documented to build from.
The record is physical only
A digital archive is required before that sample is consumed or shipped to another site.
Request a project review
Send the board context, layer count, and the maintenance goal. Quotes are prepared after that review.
Open the inquiry form